ICOM iR3 Bedienungsanleitung Seite 32

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 64
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 31
28
8
SUBAUDIBLE TONE OPERATION
Tone squelch operation
Operation
The tone squelch opens only when receiving a signal con-
taining a matching subaudible tone. You can silently wait for
calls from group members using the same tone in an ama-
teur band.
q Set the operating frequency in FM mode.
w Set the desired subaudible tone in set mode.
See the following section for programming.
e Push [FUNC] + [(MODE) SET] momentarily to enter set
mode.
Select a non-band scope screen in advance for color LCD.
r Rotate [DIAL] until Tone Squelch or tSqL appears.
•“tSqL disappears after 1 sec. and to appears when color LCD
is OFF.
t Push [] or rotate the tuning dial while pushing [FUNC] to
select TSQL (tone squelch).
y Push [(MODE)SET] to exit set mode and start the tone
squelch.
u When the received signal includes a matching tone, the
squelch opens and the signal can be heard.
When the received signals tone does not match, tone squelch
does not open, however, the S-indicator shows signal strength.
To open the squelch manually, push and hold [SQL]. (default)
i To cancel the tone squelch, repeat steps ey as de-
scribed above and select OFF in step t.
Setting subaudible tones for tone squelch
operation
q Select VFO mode or desired memory channel to be pro-
grammed.
Tone function set
mode
Tone Squelch: OFF
Tone Freq. : 88.5
Duplex : OFF
Offset Freq.: 0.600
Scan Resume : 2SEC
Tone Squelch: OFF
Tone Freq. : 88.5
Duplex : OFF
Offset Freq.: 0.600
Scan Resume : 2SEC
Tone Squelch: TSQL
Tone Freq. : 88.5
Duplex : OFF
Offset Freq.: 0.600
Scan Resume : 2SEC
Tone squelch OFF Tone squelch ON
Seitenansicht 31
1 2 ... 27 28 29 30 31 32 33 34 35 36 37 ... 63 64

Kommentare zu diesen Handbüchern

Keine Kommentare