Icom DSC CONTROLLER DS-100 Bedienungsanleitung PDF herunterladen (Seite 31)

MB-75

e Using the 2 supplied bolts (M5 x 8 mm), attach the clamps

on either side of the DS-100 as shown below.

• Make sure that the clamps align parallel to the DS-100’s

body.

r Tighten the end bolts on the

clamps (rotate clockwise) so

that the clamps press firmly

against the inside of the in-

strument control panel.

t Tighten the locking nuts (ro-

tate counterclockwise) so that

the DS-100 is securely

mounted in position as below.

y Connect the antenna and con-

trol cable, then return the in-

strument control panel to it’s

original place.

1 2 ... 26 27 28 29 30 31 32 33 34 35 36

Keine Kommentare

Icom DSC CONTROLLER DS-100 Bedienungsanleitung Seite 31