ICOM iC-r8500 Bedienungsanleitung PDF herunterladen (Seite 28)

SCANS

D Priority scan

Priority scan monitors a speciﬁed frequency (the pri-

ority channel) once every 1–16 sec. (programmable)

during any operation, such as receiving, scanning

other channels, etc.

Preparation—priority channel programming:

q Push [PRIO] for 1 sec.

•“*SET*” appears in the bank name area, then

changes to a ﬂashing “PRIO.”

• Using this method, the priority channel can be called up

at any time with one push.

Set the desired frequency, mode and memory

name.

e Push [MW] for 1 sec. to write the contents into the

priority channel.

r Push [PRIO] again to return to the previous chan-

nel.

Start/stop:

Push [PRIO] to start/stop the scan.

• Priority scan can be used in combination with other scan

types: start another scan type during priority scan; or,

push [PRIO] while operating another scan.

To operate memory scan or memory select scan in a

speciﬁc mode (ignoring other modes), the mode

select function is available.

q Push [MEMO] or [SEL] to start memory scan or

memory select scan, respectively.

w Select the desired mode to operate the scan in via

the mode switches.

• The mode select function is applied to memory or mem-

ory select scan.

e Push [MEMO] or [SEL] again to stop the scan.

Priority scan

Programmed scan with priority scan

■ Mode select function

• Specifying skip channels

q Select the memory channel to be speciﬁed as a

skip channel.

w Push [SKIP] for 1 sec. to toggle the setting ON and

OFF.

• SKIP-CH appears when ‘skip’ is set.

• Programming skip frequencies

(for programmed scan)

q Start programmed scan.

w When the scan pauses on an undesired signal,

push [MW] for 1 sec.

• The frequency is memorised into the skip bank as a

skip frequency.

• The specified channel is skipped during memory and

memory select scans.

• The programmed frequency is skipped during pro-

grammed and auto memory write scans.

■ Specifying skip channel and frequency

ICOM IC-R8500

SKIP-CH

SKIP

kHz

The channel is specified as a ‘skip’ channel.

Push [MW] for 1 sec. while programmed scan pauses.

PROG0 IC-R8500

RECV

OFF DLY

∞

Mch 1

Mch 2

Mch 3

Mch 4

Mch 5

Mch 6

Mch 7

Mch 39

Skip

Select

WFM

USB

Select

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 47 48

Kommentare zu diesen Handbüchern

Keine Kommentare

ICOM iC-r8500 Bedienungsanleitung Seite 28

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Empfänger ICOM iC-r8500